CDHPOWER Brushed Alum Frame/2.4L Fuel Tank Gas Frame and Wide Pedal

 

cdhpower2012 has been registered on Ebay. We are the only brand owner. We did not authorize any third party to use our pictures or brand.Please recognize cdhpower brand. 

CDHPOWER Bicycle Gas Frame w/Gas Fuel Tank 2.4L Frame-Brushed Alum,Gas Bicycle
Key Product Features

Note: 

If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional.

New reinforced GT-A with disc brake mounting ports ready on the rear end of the frame;

Brake system: Disc brake and V brake

Gas motor with 8mm front mount bolts fits on well on the Pedestal mt of CDH gas frame!

GT-A Gas Frame w/fuel tank 2.4L - Brushed Alum;

CDHPOWER Gas Frame 2.4L Requirement on seatpost:27.2mm, Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame; Brushed Alum bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacing

Rear Disc brake bracket and front mount pedestal works well with gas motor front mount bolts 8mm；rear width:135mm

Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.

38mm diameter downtube 70 degrees angle V frame

the width and Inner Diameter (including depth of screw) of the bottom bracket : 68mmx51.5mm/2.677inx2in
Bottom bracket: 51.5mm (inner diameter)&60mm (outer diameter)

Required for seat post:27.2mm

Required for seat post clamp:31.8mm

PLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm; requirement on headset size:1 1/8"; bottom bracket 2" diameter; 

 

Product description 

- Built-in 2.4L gas tank Designed for the 2-cycle engines with 40 to 50mm wide front mount stud spacing

- Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.

- 38mm diameter downtube 70 degrees angle V frame

- requirement on headset size:1 1/8"; bottom bracket 2" diameter;

- Requirement on switch of gas frame: 10*1.0mm:CDHPOWER Gas Tank Petcock/Value 10x1.0mm (Fit CDH 2.4L and 3.75L Gas Frame)

If you just want to bolt up and ride without messing with zip-tie's or fabricated mounts, then the 26" Motorized Bicycle Frame with fuel tank is the frame you've been looking for.

Ditch that old, clunky tank- this frame's got a 2.4L gas tank built right in to it with an easy-to-use twist gas cap. The frame also cleans up your cables with cable ports running along the center and bottom of the bike, eliminating the need for ugly zip-tie's that can scratch your paint job. 

Brake system: Disc brake and V brake

The 26" Motorized Bicycle Frame is a lightweight, high quality bike frame just waiting for your next build!

CDHPOWER 2''Cup Wide Pedal Crank Kit One-Piece Crank for 2 Stroke Motorized Bike

Key Product Features

            

Note:

1, If you buy it, please measure the size, fit 2'' cup.

2, This product can’t work with pulling start 2 stroke engine kit.

NOTE: Compatible with 1/2 inch pedals. 

CDHPOWER 2'' cup Wide Pedal Crank Kit, One-Piece Crank, for 2-stroke motor, Gas Motorized Bicycle

 - Wide Pedal Crank Kit, One-Piece Crank 

- are required for 2-storke kick start engine kit

- Good quality 

- Length of Arm:152mm/5.98 inch

- The distance between the pedal crank arms is about 18.5cm

Product Description

Wide Pedal Crank Kit - 2 inch - One-Piece Crank 

are required for 2-storke kick start engine kit

Good quality

Rear Disc brake bracket.

Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.

Rear Disc brake bracket and front mount pedestal works well with 8mm gas motor front mount bolts .

Bottom bracket 2" diameter.

0.5mm thickness front mount pedestal.

CDHpower Reinforced front mount pedestal.

38mm diameter downtube 70 degrees angle V frame.

Head tube: 150mm.

Requirement on headset size:1 1/8"

Sample of gas bike w/2.4L gas frame.

This is how it looks like when you finish building the complete bike.

Item Weight : 10.15 pounds

CDHPOWER 2'' cup Wide Pedal Crank Kit, One-Piece Crank, for 2-stroke motor, Gas Motorized BicycleAre required for 2-storke kick start engine kit,Wide Pedal Crank Kit, One-Piece Crank

The distance between the pedal crank arms is about 18.5cm

 

Shipping:

Shipping is FREE to all addresses other than Alaska/Hawaii,APO/PO boxes .

We ship FAST - We will ship the product on the second business day.

We work with all major shipping companies (UPS, USPS, FedEx etc.) and provide TRACKING NUMBER to ALL orders.

Please ensure that the address is verified and correct during checkout.

We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.

Payment

We accept payment via PayPal only.

We will ship the item as soon as payment is cleared on PayPal.

Returns

We stand behind our products. 

We offer a 30 Days Return Policy on items which you are not completely satisfied with.Returns are gladly accepted if it is in the original condition, including all manuals and accessories.You have the option for a full refund or an exchange of the item (subjected to stock availability).When sending in a return, please note that it can take up to 7 business days for the return to be processed.

FEEDBACK:

We maintain high standards of excellence and strive for 100% customer satisfaction! 

Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them!

 

CONTACT_US:

For helping with your order or if you have any questions regarding our products, please contact us through eBay's internal message system.
All messages are answered within 24-48 hours. We will do our best to resolve the issue.

Looking forward hearing from you,

CDHPOWER Support Team.

Thank you for looking, if you have any questions, feel free to ask and I will do my best to get back to you promptly!

Products usually shipped on the second business day and you will receive message of tracking ID.

CDHPOWER is registered officially in year 2012 and started business in year 2008, we can provide engine kits, high performance spare parts of engine, motorized bicycle and spare parts of bike.